{rtf1ansiansicpg1252deff0deflang1040{fonttbl{f0fswissfprq2fcharset0 Courier New;}}{colortbl ;red0green0blue0;}viewkind4uc1pardcf1f0fs20 Ceiling mounting dual technology for indoor environment composed by one PIR and one microwave with planar antenna at 10.525 GHz. The very thin circolar structure makes it particularly suitable and effective for domestic installations. A sophisticated algorithm that simultaneously analyzes the two detection technologies, makes it suitable for installation in difficult environments, providing an high degree of immunity to events that in other types of detectors could be cause of false alarms. The sequence of warnings provided by the two sensors is appropriately analyzed by the microprocessor avoiding external phenomena (such as drafts, heat sources and electrical noise) that could generate unwanted alarms. Provided with anti-masking function (through pulse counting) and warning function. The masking of the infrared sensor is detected, when the system is armed, after five activations of the microwave in a range of thirty seconds without detections from the infrared sensor; in this condition the operating logic change from AND to OR and an alarm event is sent to the control panel. The warning function is activated, with system is disarmed, if one of the technologies detects fifty times while the other has detected nothing. The realization with SMD components has made possible to get smaller dimension despite the complexity of the functions performed, increasing reliability of the circuit and not least an high immunity to electromagnetic interference. The semispherical lens and the microwave with planar antenna, ensure coverage of 360’b0. The coverage area in the widest part is approximately 11.4 m if set at 4 m high. Accordance with the IEC 79-2 2nd ed. ’98 Liv I.par}

  • Infrared Sensor: PIR low noise double element
  • Microwave with planar antenna: 10.525 GHz
  • Detection area: elliptic, major axis 11.4 m – minor axis 5 m if set at 4 m high (reducing the height, decreases the area covered)
  • Power supply: 8 ÷ 16 Vdc
  • Power consumption: 34 mA
  • Alarm relay: NC 
  • Installation: Ceiling mounting
  • Tamper output: dedicated NC contact 
  • Tamper: microswitch
  • AND / OR function: selectable
  • Warning function: dedicated output
  • Antimasking function: by counting pulses
  • Memory function: present
  • LED function exclusion: present
  • Operating temperature: + 5° C ÷ + 40° C
  • Dimensions: Ф 129 x 43 mm
  • Weight: 106 g

We are always at your service

Do you want feel secure and safe in your home? Don’t worry. We’ll take care of everything.


A complete range of products

Security means everything to us

Contact us

Security means everything to us


    Dear Customer,

    in accordance with the provisions of EU Regulation 679/2016 ("GDPR"), LINCE ITALIA wishes to make it aware of the processing activities that will be carried out on the personal data supplied by you through the New Customer Entry Form. In particular:

    Data Controller
    The Data Controller is LINCE ITALIA S.r.l., with headquarters in Via Variante di Cancelliera snc 00072 - Ariccia (RM). The Data Subject can exercise his rights by sending a registered letter to the registered office or by sending an e-mail or certified e-mail to lince@pec.it.

    The Data Processing
    The processing concerns exclusively data directly communicated by the Customer, and in particular common personal data (identification and contact data, as well as other data necessary for billing purposes, such as address). With reference to the latter, we take this opportunity to emphasize that the data of natural persons are always classified as "personal", while legal persons are generally excluded from the scope of the GDPR (articles 1 and 4 of the GDPR). However, the Customer-Legal person may have indicated, in the Customer entry form, identifying data of natural persons operating within their Company: if these data are suitable to make a natural person identified or identifiable (for example: name.surname@azienda.it), will be treated by LINCE as personal data. Some segments of the requested activity could be performed by LINCE in outsourcing: for the performance of some activities, LINCE could delegate certain functions to certain external companies that offer the guarantees required by the GDPR, thus enabling them and to perform certain operations on behalf of LINCE , in accordance with the instructions provided by the latter through a specific data management agreement.
    Images, audio/video recordings: on the occasion of the exhibition or the present event, LINCE could record images and videos, possibly also containing audio, from which the Data Subject could be recognized. These recordings are made with the express written consent of the interested party and are aimed at purely informative and/or promotional purposes.

    Purpose and Legal Basis of Treatment
    • The processing of personal data includes all the operations that are necessary for service purposes, ie to allow LINCE to provide the requested service, send the products purchased, provide information about the products and fulfill the obligations imposed on LINCE by law. In this case, the legal basis, for all cases which do not coincide with the fulfillment of legal obligations, is the consent given by the interested party.
    • A further processing of personal data that can be carried out by LINCE - only if expressly authorized by the interested party with specific consent - is the sending of commercial and/or promotional communications.
    • Another processing activity that can be carried out by LINCE upon the express consent of the interested party is that relating to the images, and audio/video recordings, for informative and/or promotional purposes.

    Method of Data Processing
    The processing of personal data is carried out - in paper format (archives) and in electronic form (website and management, databases, text processing programs) - by means of operations including collection, recording, updating, organization, storage, consultation, processing, modification, selection, comparison, use, interconnection, blocking, cancellation and destruction of data.

    Storage of the Personal Data
    The Data Controller processes the Data for the time necessary to reply to your request and/or to fulfill the aforementioned purposes The data is stored for a period not exceeding 10 years from collection or last verification.

    Communication of Personal Data
    • Personal data may be communicated to third parties (for example, partners, professionals, agents, etc.) for the performance of activities functional to the aforementioned purposes.
    • LINCE does not communicate personal and contact data to third-party companies operating as independent Data Controllers.
    • Personal data may be disclosed, even without the consent of the Data Subject, within the limits of the aforementioned purposes, to control and security bodies, law enforcement or judiciary who will treat them, on their express request, as a autonomous data controllers for institutional and/or legal purposes during investigations and controls.
    • The images collected during the exhibition or events, which do not include the name or other personal data and/or contact details of the Data Subject, can be communicated, transferred and disseminated in accordance with what is expressly provided for in the release, and to the extent authorized by the Data Subject.

    Data transfer
    The identification and contact data are not disseminated or transferred to countries outside the EU. The management and storage of personal data will take place on servers located within the European Union. In any case, it is understood that the Data Controller, if necessary, will have the right to move the location of the servers in Italy and/or the European Union and/or non-EU countries. In this case, to ensure an adequate level of protection of Personal Data, the transfer of data to non-EU countries will take place by virtue of the adequacy decisions approved by the European Commission or the adoption, by the Data Controller, of the Contractual Clauses Standards prepared by the European Commission. The images and audio/video footage, made for informative and/or promotional purposes, can instead be disseminated and transferred, within the limits of what is authorized by the interested party.

    Data Collection
    The collection of identification and contact data is necessary for the Service Purposes. In the event that the data subject chooses not to provide the Data, LINCE cannot comply with his request.
    The collection of data for marketing purposes is, however, optional. The Data Subject can then decide not to give the Data or subsequently deny the possibility of processing Data already collected: in this case, the Data Subject will not be able to receive personalized commercial communications on the Data Controller products.
    Consent to use images and audio/video footage is also optional; however, if the interested party decides not to consent to such registrations, LINCE could use the image obscuring the face.

    Rights of the interested party
    The Data Subject has the right to access their data and request and obtain at any time the indication: a) of the origin and content of the same; b) the purposes and methods of processing; c) of the identification details of the Data Controller and of the data processors as well as of the subjects to whom the data may be communicated as managers or agents. It is also his right to obtain the updating, rectification, integration, deletion, transformation into anonymous form and/or blocking of data processed in violation of the law, and to oppose their processing, for legitimate reasons, for the purposes relevant to the purpose of the collection and, in any case, for the purposes of direct marketing and/or market research.

    I consent to the processing of data according to the Privacy Policy

    I agree to send commercial, advertising and promotional communications

    Scrivici ora!